Metal Roofing & Cladding Material

LM 3000

  • LM 3000 is a high performance wall panel and commercial soffit with a net coverage from 10.5″ (267mm) to 12.5″ (318mm) wide. If used for soffit, the panel can be formed with optional perforations.

    • Standard width of 10.5″ (267mm) to 12.5″ (318mm).
    • Roll formed to custom length in 24ga and 22ga.
    • Available in Pre-painted Steel, Galvalume, Galvanized, Aluminum, Copper and Rheinzink.
    • Optional Single Stiffener, Double Stiffener or Perforations.

1″ Standing Seam / Curved / Tapered

  • 1″ Standing Seam is a widely used concealed fastener roof panel for installation over solid substrates with vapour barrier. This panel also comes in curved and tapered variations.

    • Standard width of 13″ (330mm) and 21″ (533mm) or custom width from 13″ (300mm) to 21″ (533mm).
    • Roll formed into custom length in 26ga, 24ga and 22ga. Tapered Standing Seam is break formed up to 20′ long.
    • Available in Pre-painted Steel, Galvalume, Galvanized, Aluminum, Copper and Rhienzink.
    • Optional Double Stiffener or Straiations for wide panels to reduce the appearance of oil canning.

1″ Snap Loc

  • 1″ Snap Loc is a concealed snap-on roof panel for commercial, institutional and residential applications. This panel must be installed over solid substrates with vapour barrier.

    • Standard width of 12″ (305mm) or 16″ (406mm).
    • Roll formed to custom length in 26ga and 24ga.
    • Available in Pre-painted Steel, Galvalume, Galvanized, Aluminum, Copper and Rheinzink.
    • Snap on design for simple installation and eliminating exposed fasteners.

1/4″ Corrugated

  • LMC’s 1/4″ Corrugated is perfect for sophisticated decorative finishes on walls, ceilings and soffits. It is suitable for both interior and exterior applications, and on straight or curved surfaces. It could be installed vertically or horizontally, but it is not suitable for roof application.

    • Net 24″ (610mm) coverage.
    • Roll formed to custom length in 26ga.
    • Available in Galvalume and Pre-painted Steel.
    • Suitable for exterior and interior finish.

Mini Flush

  • Lam’s Mini Flush is a variant of the Mini Plank without a reveal. It is a flushed small wall and soffit panel, most suitable for finer detailed jobs. With the face size as small as 4″ (102mm) wide by 1″ (25mm) deep, it is a perfect alternative to cedar siding – more colour selections with less maintenance.

    • Variable 4″ (102mm) to 11.5″ (292mm) width. Standard widths are 7.5″ (191mm) an 11.5″ (292mm).
    • Roll formed to custom length in 24ga and 22ga Steel.
    • Available in Pre-painted Steel, Galvalume, Galvanized, Aluminum (.032″), Copper (16oz) and Rheinzink (.8mm).
    • Most cost efficient sizes 7.5″ (191mm) and 11.5″ (292mm) width.

Deep Corrugated

  • LMC’s 1.5″ Deep Corrugated is a bold definitive sinuous pattern commonly used on industrial, commercial and architectural projects. This versatile panel can be used on roofs, walls and soffits. It is suitable for both interior and exterior applications. For wall it could be installed vertically or horizontally.

    • Roll formed to custom length in 26ga to 20ga subject to type of metal.
    • Available in Pre-painted Steel, Galvalume, Galvanized, Aluminum, Cooper and Rheinzink.
    • Suitable for exterior and interior finish.

*Content source: lammetal.ca

Still Have Questions?

Contact us to learn more about which metal is best for your project!

Call Now

Best of HomeStarsBest of North Shore Vancouver><a href=Certified Roofing Contractor MalarkeyCertainTeed Certified Master Shingle Applicator
A+ Rating BBBHouzz Profile

Request an Estimate
New Sidebar Estimate Contact
First
Last
***Solicitors will be marked and reported as spam***
Sending

Get An Estimate

Are you interested in our residential or commercial roofing services? Contact our Roofing Experts today to get an estimate on your required service.